In IP/3G operation the display defaults to indicate radio operation. You can switch the display to show IP related information by using Menu M.

no eth

Ethernet cable is not connected to the SPT and/or hub/ switch.

negot

- WebWay “Router Ping” feature is enabled.
- Router is not responding.

t

10BaseT half duplex LAN connection

t. (dot)

10BaseT full duplex LAN connection

h

100BaseT half duplex LAN connection

h. (dot)

100BaseT half duplex LAN connection

no ip

- SPT is not configured for IP operation.
- SPT does not have an IP interface.

no router

WebWay “Router Ping” feature is enabled. Router is not responding.

no dhcp

- SPT configured for automatic assignment of the IP address using DHCP.
- No DHCP server/router has been found on the network.
- SPT has not been given its address.

Ping good

- WebWay “Router Ping” feature is enabled.
- Router is responding.

Ping fail

- WebWay “Router Ping” feature is enabled.
- Router is not responding.

Phone
Email

Support

Knowledge Base

Panel Guides

Downloads

FAQs