Honeywell Galaxy Ethernet Module (RS485)

Shopping cart is empty.
- View Cart

Panel Connection - Ethernet Module

Manufacturer Honeywell
Model Galaxy
Version Dimension, G3, G2, Classic.
Minimum Panel Firmware V4.0 Minimum (Galaxy G2 panels V1.4 is the minimum)
Cable required? No - (WWO Cable 050222 is available)
MCM, Serial or Peripheral Serial
Panel Profile 'Galaxy Profile' or for G2 Panels 'GALAXYG2'
Panel Bus Connection RS485
Technical Notes See Galaxy Troubleshooting & G2 - Specific Programming below

Cable Connection

PANEL - Standard 3 core cable
OR
WWO Cable: 050222
SPT Colour
A1 or A2
OR
Engineer Socket (RS485 Line 1 or Line 2) Pin 3
485 A Red Wire
B1 or B2
OR
Engineer Socket (RS485 Line 1 or Line 2) Pin 4
485 B Brown Wire
GND
OR
Engineer Socket (RS485 Line 1 or Line 2) Pin 2
RTN
(Required)
Green Wire

Images

Galaxy Panel Connections

Galaxy Panel Connections

Panel Layout

Panel Layout

SPT Nano Connections

SPT Nano Connections

SPT Pro Connections

SPT Pro Connections

Panel Programming

  • Enter Engineering Mode.
  • Engineer Menu 56
  • Select Ethernet Module (Menu 4)
  • Select Alarm Reporting (Menu 2)
  • Select Format (Menu 1)
  • Enter SIA (Option 2)
  • Select SIA level 3
  • Ensure Trigger 10 is ON
  • Ensure Trigger 18 is ON
  • Activate any further triggers which are required
  • Select Primary IP (Option 2)
  • Set IP Address. Acceptable values <127.0.0.1> to <127.0.0.9>
  • Set Port Number <50561>
  • Select Account Number (Option 4)
  • Enter Site ID <_____> (Chip Number)
  • Go to Remote Access (Option 3)
  • Select Access Period (Anytime)
  • Select Mode (Direct Access)
  • Escape to return to Engineering mode.
  • Exit Engineer Mode into Day Mode
  • Panel Connection - as a Telecoms Module
  • Engineer Menu 56
  • Select External Telecoms Module (Option 5)*
  • Select Alarm Reporting (option 2)
  • Select Format (Option 1)
  • Enter SIA (Option 2)
  • Select SIA level 3
  • Ensure Trigger 10 is on
  • Ensure Trigger 18 is on
  • Activate any further triggers which are required
  • Select Tel No. 1 (Option 2)
  • Set Phone number (01234 567890)
  • Select Account Number (Option 3)
  • Enter Site ID <_____> (Chip Number)
  • Go to Remote Access (Option 3)
  • Select Access Period (Anytime)
  • Select Mode (Direct Access)
  • Older panels may support an Internal Telecom Module (Menu 1) which may be classed as an External Module

Galaxy Troubleshooting

  • Menu 23: Panel Firmware Version
  • Menu 62: Full Set inside Engineering
  • Galaxy panels running version V1.4 and below cannot support SIA and are a pins only integration.
  • Panel Manufacturer Default Codes - USER: 1234 or USER 12345
  • Panel Manufacturer Default Codes - ENGINEER: 112233

G2 - Specific Programming

  • Follow above Panel Programming then complete the below - Galaxy G2 Panels Only
  • Select H/W Priority (Option 6)
  • 1.Select Telecom [0]
  • 2.Select Ethernet [1]
  • Use escape to return to Engineer Mode. You need to fully exit Engineering to find the WebWay as a Comms module, we also emulate a Keypad, typically Comms Module 004 and Keypad 015 – varies between panels.
  • SPT is running V1.12 or later.

UDL information for this item can be found here: UDL Test

Support

Knowledge Base

Panel Guides

Downloads

FAQs

Twitter Updates
Latest News
Contact Details

  Address: 11 Kingfisher Court, Hambridge Road, Newbury, Berkshire RG14 5SJ

  Email: sales@webwayone.co.uk

  Phone Number: +44 (0)1635 231 500