Remote Manager Setup

The ‘PCC-2X 2010-2 Configuration Utility’ application will use the local loopback IP communication interface to the RM. The Local Loop IP address is used to identify (using SPT account number) the remote panel the user want to connect to.

Note: The SPT must have the fixed IP address of the panel so it knows where to connect to.

Create a 'PCC-2X UDL Session:

1) Run up Remote Manager.

2) Click on the [Sessions] menu item and select the [New] menu item. RM will display a new [Session Configuration] page.

3) Give the new session a name by entering a name in the [Session Name] edit box.

4) Then click on the [Session Type] drop down list box and select [EthernetServer] from the list.

5) Click on the [SSH Server 1 IP] edit box and enter the IP address of the PC that is running the SSH Server and WebWayOne’s MCT application and press the [Save] button.

6) Click on the [Modify] button and the [Edit properties] button. The following form will be displayed.

7) Add port '2505' the [TCP Ethernet ports] [Program] list.

PCC-2X 2010-2 Configuration Utility (UDL)

Run up the PCC-2X and select a site.

1) Select the [Communications] tab.

2) Select [TCP/IP] in the [Connection Method] group.

3) In the [Remote TCP/IP Connection] group, enable the [Remote] tick box and add the Local Loop IP address 127.x.x.x for the WWO SPT account.

4) Press the [Connect] button to connect to the remote panel. A Communications Status box will show you the connection process with possible errors.